W-PFS Premium Fuel Polishing Range

section-2dc76e8

The W-PFS range is our most versatile and therefore most popular system for cleaning stored fuel and thus protecting your engine or generator by removing emulsified waterfree water and particulate to 2 micron.

 

The standard units start at 8 lit/min and increase to a maximum of 400 lit/min, with our largest custom built unit being able to handle up to 1600 lit/min (that's nearly 100,000 litres per hour).

Systems typically have manual, automatic (programmable timer) and BMS control as standard via our user friendly touchscreen control system.

 

W-PFS-010-220vac(A wall mounted 10 lit/min system filtering particulate aswell as free and emulsified water.)

They are self pumping and self monitoring fuel cleaning devices which are typically installed near to your fuel tanks. We also offer portable systems, units in IP rated enclosures, and frame mounted units and fieldbus communication options. The PFS range can be custom built to your specifications and we have a wide range of add-on options to meet all your needs.

If you are looking for a simpler, cost effective solution filtering to ,10 micron, we recommend the WB Range .

 

SUITABLE FOR

Tank sizes 7,500 to 1,000,000 litres Cleaning 8-400 litres per minute.

TOUCH SCREEN CONTROL

Easy to use, manual and auto set up, BMS, reporting and trending, export data, Ethernet desktop sharing and much more.

CLEAN TO 2 MICRON

Including removal of emulsified and free water, bacteria, dirt, and particulate.

FUEL PROTECTION

For data centres, generators, hospitals, agricultural tanks, government, embassies, banking, marine...

section-cae559d
section-e33a96f
ModelW-PFS-008
Max flow rate8 lit/min max fuel flow rate **
Recommended Tank size (litres)0-10,000
Power options12v DC

24v DC

Finish optionsWall Mounted, Frame Mounted, Enclosure, Trolley
Particulate removal to2 Micron
Control unitTouch screen - 24vDC

PLC - 12vDC

BMS (Building Management Systems) Outputs6
BMS Inputs2
Fuse12vDC 5a

24vDC 3a

Typical current12vDC 5a

24vDC 3a

Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes3/4" BSP
Pump BodySteel
GearsPTFE Vane
ShaftStainless steel
SealFlouoroelastomer
Dimensions *700x700x250mm
Weight *18kg approx

 

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no left, wide pipe work, etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

ModelW-PFS-010
Max flow rate10 lit/min max fuel flow rate **
Recommended Tank size (litres)0-12,500
Power options220v 50hz 1ph AC
Finish optionsWall Mounted, Frame Mounted, Enclosure, Trolley
Particulate removal to2 Micron
Control unitTouch screen
BMS (Building Management Systems) Outputs6
BMS Inputs2
Fuse1a
Typical current1a
Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes3/4" BSP-P
Pump BodySteel
GearsPTFE Gear
Shaft316 Stainless steel
SealFlouoroelastomer
Dimensions *700x700x350mm
Weight *21kg approx

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no left, wide pipe work, etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

ModelW-PFS-014
Max flow rate14 lit/min max fuel flow rate **
Recommended Tank size (litres)7,500-20,000
Power options12vDC

24v DC

Finish optionsWall Mounted, Frame Mounted, Enclosure, Trolley
Particulate removal to2 Micron
Control unitTouch screen - 24vDC

PLC - 12vDC

BMS (Building Management Systems) Outputs6
BMS Inputs2
Fuse12vDC 10a

24vDC 5a

Typical current12vDC 9a

24vDC 4a

Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes3/4" BSP-P
Pump BodySteel
GearsPTFE Gear
Shaft316 Stainless steel
SealFlouoroelastomer
Dimensions *700x700x250mm
Weight *19-31kg approx

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no left, wide pipe work, etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

ModelW-PFS-026
Max flow rate26 lit/min max fuel flow rate **
Recommended Tank size (litres)10,000 - 30,000
Power options220v 50hz 1ph AC

12vDC

24v DC

Finish optionsWall Mounted, Frame Mounted, Enclosure, Trolley
Particulate removal to2 Micron
Control unitTouch screen - 24vDC. 220vac

PLC - 12vDC

BMS (Building Management Systems) Outputs6
BMS Inputs2
Fuse220vAC 3a

12vDC 15a

24vDC 8a

Typical current220vAC 3a

12vDC 12a

24vDC 5a

Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes 1" BSP-P Male
Pump BodySteel
GearsPTFE Gear
ShaftStainless steel
SealFlouoroelastomer
Dimensions *1000x800x300mm
Weight *42KG approx

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no left, wide pipe work, etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

ModelW-PFS-040
Max flow rate 40 lit/min max fuel flow rate **
Recommended Tank size (litres)Up to 50,000
Power options220v 50hz 1ph AC

24v DC

Finish optionsWall Mounted, Frame Mounted, Enclosure, Trolley
Particulate removal to2 Micron
Control unitTouch screen
BMS (Building Management Systems) Outputs6
BMS Inputs2
Fuse220vAC 3a

24vDC 15a

Typical current220vAC 2a

24vDC 11a

Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes 1" BSP-P Male
Pump BodySteel
GearsPTFE Gear
ShaftStainless steel
SealFlouoroelastomer
Dimensions *1000x1000x450mm
Weight *65KG

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no left, wide pipe work, etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

ModelW-PFS-060
Max flow rate60 lit/min max fuel flow rate **
Recommended Tank size (litres)Up to 100,000
Power options220v 50hz 1ph AC
Finish optionsWall Mounted, Frame Mounted, Enclosure
Particulate removal to2 Micron
Control unitTouch screen
BMS (Building Management Systems) Outputs6
BMS Inputs2
Fuse4a
Typical current 3a
Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes1 1/2" BSP-P
Pump BodySteel
GearsSliding Vane
ShaftStainless steel
SealFlouoroelastomer
Dimensions *1100x800x450mm
Weight * 75KG approx

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no left, wide pipe work, etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

ModelW-PFS-120
Max flow rate 120 lit/min max fuel flow rate
Recommended Tank size (litres) Up to 200,000
Power options220v 50hz 1ph AC
Finish optionsFrame Mounted, Enclosure
Particulate removal to2 Micron
Control unitTouch screen
BMS (Building Management Systems) Outputs6
BMS Inputs2
Fuse5a
Typical current 5a
Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes 2" BSP
Pump BodyStainless steel
GearsStainless steel
ShaftStainless steel
SealFlouoroelastomer
Dimensions *1750x1500x1200mm
Weight *245KG

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no left, wide pipe work, etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

ModelW-PFS-240
Max flow rate240 lit/min max fuel flow rate**
Recommended Tank size (litres)Up to 500,000
Power options220v 50hz 1ph AC
Finish optionsFrame Mounted, Enclosure
Particulate removal to2 Micron
Control unitTouch screen
BMS (Building Management Systems) Outputs6
BMS Inputs2
Fuse10a
Typical current 9a
Suction capability5m vertical, we always recommend using a non return valve and priming the unit before use.
Port sizes 2" BSP
Pump BodyStainless steel
GearsStainless steel
ShaftStainless steel
SealFlouoroelastomer
Dimensions *2000x1500x1800mm
Weight *450KG

*Measurements are approx

**Flow rates quoted assume the ideal conditions, a large positive head, no left, wide pipe work, etc. Narrow pipes, tight bends, elbows, lifts and other such external factors can and will impact on the maximum flow achieved by the system.

For more technical information, please see the Technical Details tab.

section-5533f98

Choosing your ideal system..

Is easy as 1, 2, 3 Need help? Contact us

CLEANING SPEED

From 8 lit/min - 240 lit/min

POWER

12vDC, 24v DC or 220v AC?

ADD-ONS

Need a drip tray, multi-tank cleaning, MODBUS, heating, cooling....

WOULD YOU LIKE TO COMPARE THE FEATURES OF THE WB AND THE W-PFS RANGE?

See our early to read comparision chart to ensure your required features are included in your choice

section-eec1641
Get a Quote

Use this form to get a competitive quote!

How Does It Work?

Check out our interactive WASP Fuel Polishing System

Which Fuel Polishing System

Try our interactive product selector

WASP Power and Filtration Solutions - supplying fuel polishing systems, filters, additives, pumps, side stream filtration, fuel testing services, generator servicing and oil change systems.