W-51000 WASP Primary Fuel Filter

W-51000 WASP Primary Fuel Filter

“The main design benefit of the self-clean filter range is that it can be serviced without being dissembled”.

The flow of fluid through the unit is not interrupted and consequently neither is the operation of the system/engine it is filtering for.

This automatic system can then be controlled by a timer; or for fully automatic operation by a pressure switch mounted on the output side filter. This would then trigger cleaning due to excessive pressure loss caused by a dirty filter.

  • Self-cleaning fuel filter separator
  • 2" BSP or DN50 Pn16 flanged ports
  • 250, 500, 750 and 1000 micron options
  • Flow rates up to 333 lit/min
W-51000 range Filtration (micron) Port Size Bowl
W-51000/1 1000 micron (1mm) 2” Ports Metal
W-51000/075 750 micron 2” Ports Metal
W-51000/05 500 micron 2” Ports Metal
W-51000/025 250 micron 2” Ports Metal
W-51000/1F 1000 micron (1mm) DN50 Pn16 2” Ports Metal
W-51000/075F 750 micron DN50 Pn16 2” Ports Metal
W-51000/05F 500 micron DN50 Pn16 2” Ports Metal
W-51000/025F 250 micron DN50 Pn16 2” Ports Metal
Under Construction
  • W-51000 Threaded 2" UNI-ISO 7/1
  • W-51000F Flanged DN50 Pn16 ISO 7005
  • Max operating pressure 4 bar
  • Max operating temperature 120°C
  • Fuel: Diesel oil and heavy oil
  • Filtering degree: 250 - 1000μm
  • Drain plugs: Rp 1"1/4 (gal steel)
  • Pipe pressure plugs: Rp 1/4" (brass)

Aluminium filter body and cover, filter elements in carbon steel, brass control shaft bushing, viton sealing o-ring, control and check shaft of the scraper in steel, hand-wheel for the filtering element cleaning out of plastic anti-shock material.

Optional Installation of one or two 300W heating elements (230V/50Hz - IP65). With a temperature range of 0 to 90°C, and a fixed limited temperature of 100°C. This device has an electrical insulation of IP40 Filter elements manufactured in 304 stainless steel. Electric reducer for cleaning to the filtering unit: Rotation speed: 1 RPM Torque: 50 Nm, Power consumption: 90 W Type of motor: connection for single or three phase, Electrical insulation: IP54 An intermittent cycle is recommended for longer filtering life.

Other sizes are available in the self clean range, from 1/2" ports to 2" ports - please ask for details.

Installation

  • Make sure that the fluids are compatible with the filter material.
  • Follow the flow direction according to the arrow printed on the filter.
  • Make certain that the input/output piping is aligned and that there are no obstacles or restrictions inside.
  • Install the filter on a hard surface and avoid soft materials such as plastered walls.
  • Install the filter with the cleaning handle (flywheel) turned upwards.
  • We recommend installing a bleeding valve in the closed circuit to avoid overpressure due to the fuel temperature variations.

Servicing 

 To clean the filter, simply twist the handle at the top of the unit – this process can be manual or automatic (motorised using a variable speed drive).

Description

SUITABLE FOR SUITABLE FOR

Diesel and heating oil

 

FUEL PROTECTION FUEL PROTECTION

Ideal for Marine, Industrial and Transport applications.

 

FUEL FLOW OPTIONS FUEL FLOW OPTIONS

20,000 lit/hr (333 lit/min)

 

FILTERING OPTIONS FILTERING OPTIONS

250, 500, 750, 1000 micron

WASP Power and Filtration Solutions - supplying fuel polishing systems, filters, additives, pumps, side stream filtration, fuel testing services, generator servicing and oil change systems.